Specifications - Samsung DCS-816 General Description Manual

SAMSUNG
DCS-816

2.4 SPECIFICATIONS

The following tables provide technical data for the DCS-816 hybrid/key telephone system.
ELECTRICAL SPECIFICATIONS
AC INPUT
POWER CONSUMPTION (MAX)
DC OUTPUT
DIMENSIONS AND WEIGHTS
BASIC KSU
DIGITAL KEYSET (12/24B MODELS)
DIGITAL KEYSET (DS-2100B)
DOOR PHONE
DOOR PHONE INTERFACE MODULE (DPIM)
CTI INTERFACE MODULE
ENVIRONMENTAL LIMITS
OPERATING TEMPERATURE
STORAGE TEMPERATURE
CABLE REQUIREMENTS
EQUIPMENT
DIGITAL KEYSETS
SINGLE-LINE STATION
DOOR PHONE
CTI INTERFACE MODULE
*This is the maximum length of the cable between the door phone and the DPIM. The DPIM can
be installed up to 250 cable metres from the KSU.
Details of system tones may differ as specified by local regulations
SYSTEM TONES
TONE
DIAL TONE
RING BACK TONE
BUSY TONE
DND/NO MORE CALLS
ERROR TONE
CONFIRMATION TONE
TRANSFER/CONF
220 VAC ± 20%, 48-63 Hz
60 WATTS MAX
FUSE RATING 2.0 AMP
+5 VOLTS 1.5 AMPS MAX
-5 VOLTS 0.5 AMPS MAX (on the base board)
-55 VOLTS 0.7 AMPS MAX
-54 VOLTS 0.4 AMPS MAX
CABLE
1 PR. TWISTED
1 PR. TWISTED
2 PR. TWISTED
1 PR. TWISTED
FREQUENCIES
350 + 440 Hz
440 + 480 Hz
480 + 620 Hz
480 + 620 Hz
480 + 620 Hz
350 + 440 Hz
350 + 440 Hz
2 - 3
HEIGHT WIDTH
(mm) (mm)
465 315
108 216
88 155
127 99
29 90
29 90
0 - 40 °C
-10.5 - 70 °C
AWG MAX FEET
24
24
24
24
CADENCE
CONTINUOUS
1 sec on + 3 sec off
0.5 sec on + 0.5 sec off
0.25 sec on + 0.25 sec off
0.25 sec of each tone
Three bursts of tone: 0.1 sec on + 0.1 sec off
0.1 sec on + 0.1 sec off
General Description
March 1999
DEPTH WEIGHT
(mm) (kg)
120
229
215
32
120
120
MAX METRES
1300 400
3000 1 KM
330* 100
1300 400
1.2
0.6
0.2
0.2
0.2