Connecting To A Trigger-Voltage Source - Harman Kardon HKTS 60BQ/230 Owner's Manual

HKTS 60BQ/230
Receiver
Trigger Cable
(Black ends)

Connecting to a Trigger-Voltage Source

If your preamp/processor or another audio/video component has a trigger-voltage
connection that supplies between 3v and 30v (AC or DC), connect it to the HKTS 210SUB's
External Trigger Input 5. If the component's trigger-voltage connection has a
3.5mm mini jack, you can use the supplied combination lFe/trigger cable to make the
connection.
FRONT SURROUND
+ –
RIGHT
LFE SUB
LEFT
OUTPUT
+ – + –
CENTRE
+ –
12V
TRIGGER
OUTPUT
nOTe: Please do not connect the subwoofer On/OFF trigger cable to the Remote Control
Output (IR Out) of your home cinema system or surround receiver. Doing so could lead
to malfunction.
Speaker Connections
Subwoofer
11