Table of Contents
Advertisement
Canon
C. Installation Space Requirements
The BLM300C Booklet Maker approximate installation space requirements may
differ, depending on how the machine is configured and the optional modules
attached. Always ensure that there is enough space for service and operation
of the device. The Installation space for the BLM300C Booklet Maker adds to
the imagePRESS digital press and device installation space when configured
with the High Capacity Stacker-F1.
IMPORTANT
Installation Space includes 0.2" (5 mm) space between the components
Provide at least 19 3/4" (500 mm) on the side of the machine for
unrestricted operation, including the opening of accessory doors.
The space behind the machine to the wall and in front of the machine must
be the same as the main unit for unrestricted operation, including the
opening of the main unit and accessory doors.
The machine should not be moved once it is in place.
The floor must be level (with no bows) and flat for the stabilization and
support of the machine.
Do not place anything around the machine. Especially, do not place
anything around the breaker, as doing so may prevent access to the
breaker in an emergency, possibly resulting in personal injury.
Figure 3 – Installation Space – Square Fold Booklet-Maker
BLM300C Professional Booklet Maker Service Support Guide
Revision 2
BLM300C Professional Booklet Maker Service Support Guide
July 2014
Page 13
Advertisement
Table of Contents
