Canon
1. Learning Path for Technicians Certified on the BLM200/6300 Booklet
Maker
Technicians who are already certified on the BLM200/6300 Booklet Maker
can take the updated BLM300C Professional Booklet Maker update course
online
Table 3 – Online Course Module for BLM200/6300 Certified Technicians
BLM300C Professional Booklet Maker Update
Item Numbers and Part Numbers are subject to change without notice.
1
2. Learning Path for Non-Certified Technicians
Technicians can be certified on the BLM300C Booklet Maker by taking the
blended training course.
a. Online Course Modules
The online course module is available on Canon USA's
Center Web Site
course provides technicians with the theoretical concepts to install,
configure, and support the BLM300C Booklet Maker.
Table 4 – Online Course Modules
BLM300C & Square Fold Booklet Solutions Online
Course
Item Numbers and Part Numbers are subject to change without notice.
1
b. Classroom Courses
The 4-day Hardware classroom courses blends the information taught
online with hands-on, practical training in the classroom and lab. Each
student is provided the opportunity to assemble, disassemble, and install
key machine components, as well as troubleshoot many areas of the
machine and accessories.
Table 5 – Classroom Courses
BLM300C & Square Fold Booklet Solutions
Classroom Course
Item Numbers and Part Numbers are subject to change without notice.
1
B. Prerequisites
Prior to taking the BLM300C & Square Fold Booklet Solutions Training program,
technicians must successfully complete any of the following
High Capacity Stacker-F1 eLearning Course
The imagePRESS C7010VP Hardware Update Course
BLM300C Professional Booklet Maker Service Support Guide
Revision 2
BLM300C Professional Booklet Maker Service Support Guide
Course Name
(http://www.support.cusa.canon.com). The online
Course Name
Course Name
1
Required
Course Code
19IPCBLM300UO
Yes
e-Support
1
Required
Course Code
19IPCBLM301E
Yes
1
Required
Course Code
19IPCBLM301C
Yes
July 2014
Page 7