Table of Contents
Advertisement
completely full during draining.
labelled container.
1.
2.
3.
4.
5.
6.
7.
Figure 5 Draining a Quick Fill Filler Vaporiser
KEYED DRAINED SLOT
AGENT BOTTLE
Doc. No. 157
20 March 2019
Caution: Do not allow the drainage container to become
Caution: The vaporiser must be drained into a correctly
Remove the cap from the quick fill filler.
Remove the protective cap from an empty agent bottle. Place the
drain funnel onto the nozzle of the agent bottle, ensuring that the
index slots in the drain funnel are aligned with the agent bottle
nozzle keys. Then screw funnel onto agent bottle to secure.
Insert the drain funnel into the keyed drain slot; which is located
underneath the quick fill filler block.
Unscrew the drain valve which will allow the vaporiser to start
draining, drain until empty. Open the dial slightly.
Once draining is complete tighten the drain valve to reduce the
potential of a leak.
Remove the drain funnel and tightly replace the filler cap.
Unscrew the drain funnel from the agent bottle and replace the
protective cap. Turn the dial to "OFF".
Issue 1.0 Draft
DRAIN VALVE
DRAIN FUNNEL
NOZZLE KEYS
Apollo Operations Manual
Page 21 of 27
Advertisement
Table of Contents
