Filling & Draining - Norvap Apollo Operation & Maintenance Manual

Table of Contents

Advertisement

Figure 1
5.3 Filling & Draining
5.3.1 Screw Cap Filler (filling procedure)
Warning: Before filling a screw cap filler vaporiser, slowly unscrew the
cap to allow any pressure to vent out slowly.
1.
Ensure that the dial is OPEN. Remove the screw cap by turning it
counter clockwise.
2.
Do not tip the vaporizer during the filling operation as this will result
in over or under filling
3.
Remove the filler cap by turning it counter-clockwise,
Doc. No. 157
20 March 2019
Issue 1.0 Draft
Apollo Operations Manual
Page 14 of 27

Advertisement

Table of Contents
loading

Table of Contents