ultracomfort UC210 Owner's Manual page 6

Power Lift Chair Operation Models
UC210, UC320, UC540-S, UC540-M, UC540-L, UC540-XL, UC660,
1. To recline your chair, press the down button (S2) and hold until you reach your
desired position. Then release the button.
2. To return to a seated position from recline, press the
up button (S1) and hold until the chair returns to a
closed seated position. Then release the button.
3. To lift your chair, press the up button (S1) and hold
until you reach your desired height. Then release
the button.
4. To return to a seated position from lift, press the
down button (S2) and hold until the chair returns to
the floor, seated position. Then release the button.
S1
5. To lift your chair from a reclined position, press the up
button (S1) and hold, the chair will keep going past the
seated position and start to lift, release the button when
the chair reaches the desired height.
6. To recline your chair from the lift position, press the down button (S2) and
hold, the chair will keep going past the seated position and start to recline,
release the button when the chair reaches the desired reclined position.
7. Getting into your lift chair. While standing next to your chair, press the chair
up button (S1) and raise the chair to a height you can sit against. This height
will vary from person to person depending on the individual's needs. Raise
the chair high enough so you do not have to flop down into the chair. Flopping
down into the chair will damage it and could cause personal injury. Press the
chair down button (S2). As the chair continues downward, adjust yourself into
a position that is comfortable to you. Continue pressing the button until chair
is in the seated position (chair firmly on the floor), then release the button.
8. Getting out of your chair, press the chair up button (S1) and raise the chair to
a height that enables you to easily stand. Release the button. Return the chair
to the seated position (chair firmly on the floor) after getting out of the chair
so children, pets or obstructions do not get under the chair.
Note: Your Ultra Comfort power lift chair can be stopped at any time during
lift or recline by releasing the selected button, offering you a wide range of
comfortable positions. Select the position that best suits your needs. The motor
is set to shut off when it reaches its fully extended or fully retracted position if
the selected button is not released. If you should go past your desired position,
select the button to bring you back to your desired position. You can repeat the
process as often as you like.
UC770, UC780, UC990
5
S1
S2