Ip Arp - KeeNetic Lite KN-1310 Command Reference Manual

Arguments
Example
History

3.17 ip arp

Description
Prefix no
Change settings
Multiple input
Synopsis
Arguments
Example
History
Keenetic Lite (KN-1310) — Command Reference Guide
Argument Value
direction send
receive
(config-if)> wps self-pin receive
Receiving WiFi configuration process started (self PIN mode).
Version Description
2.00 The interface wps self-pin command has been
introduced.
Set static mapping between an IP-address and a MAC-address for hosts that
do not support dynamic ARP.
Command with no prefix removes entry from ARP table. If you use no
arguments, the whole list of ARP entrys will be removed.
Yes
Yes
Yes
(config)> ‹
ip arp ip
(config)> [ ‹
no ip arp
Argument
ip
mac
(config)> ip arp 192.168.93.52 00:A0:CC:23:AF:4A
Network::ArpTable: Static ARP entry saved.
Version Description
2.00 The ip arp command has been introduced.
Description
Send WiFi configuration.
Receive WiFi configuration from Keenetic
Lite.
› ‹ ›
mac
› ]
ip
Value Description
IP-address in four-part dotted
IP-address
decimal format corresponding to
the local data-link address.
MAC-address as six groups of two
MAC-address
hexadecimal digits separated by
colons.
Chapter 3 Command Reference
149