Battery Charging; Replace The Battery; Minimize Deactivation - Infinite Peripherals Infinea mPOS Tab User Manual

USER MANUAL- INFINEA MPOS TAB

Battery Charging

You can charge the Infinea mPOS Tab with a micro USB adapter and USB cable or by using a charging station. The time to fully charge a depleted unit is
approximately 3 hours.
Battery Status Display Indicators
During normal operations, the battery is constantly discharging. The
Battery Low message appears when the battery level is too low to
continue.
Charge the battery as soon as possible but no later than 25 days after
the message first appears. Failure to charge within 25 days may lead
to deactivation and deletion of your stored encryption keys. This
requires you to return the Infinea mPOS to Infinite Peripherals. For
https:/ /ipcmobile.com/support.
help, see

Replace the Battery

The main battery can only be replaced by Infinite Peripherals. Attempting to disassemble a SRED-encrypted unit, renders it unusable and may void
your warranty.

Minimize Deactivation

To minimize the potential for deactivation, follow all storage and operating temperature guidelines. Refer to Technical Specifications for details.
Long term storage can cause temporarily decreased battery capacity. In order to recover maximum performance, it may be necessary to go through several
cycles of fully charging and discharging the battery.
When storing the device for longer than three months, the battery should be charged every three months at a minimum to prevent leakage, reduced
performance, and potential deactivation.
1 Line - battery level >/= 3.6V
2 Lines - battery level >/=3.7V
3 Lines - battery level >/=3.8V
4 Lines - battery level >/=3.8V
5 Lines - battery level >/=4.0V
6 Lines - battery level >/=4.1V
Outside power from USB cable or power
station - plug
Battery charges from USB cable or power
station - flash
USB - connection with iPad
9