Accept Nfc Payments; Read Smart Cards - Infinite Peripherals Infinea mPOS Tab User Manual

USER MANUAL- INFINEA MPOS TAB

Accept NFC Payments

The Infinea mPOS built-in tag/card reader allows you to accept near-
field communication (NFC) payments.
1. Place a NFC tag/card over the transmitter/receiver NFC label on
the front of the unit.
2. Tap the reading NFC card button on the application. Data is sent
from the unit to the iOS device.
3. Do not remove the card/tag from the transmitter until the
transaction is complete as removing the card too quickly may
void the transaction.
Note:
Refer to the status indicators table for an explanation for the NFC
LED indicators.

Read Smart Cards

Before using the smart card reader, verify the correct procedure with
the Third-Party application developer.
1. Position the smart card with the gold contacts facing upward.
2. Insert the card into the ICC card reader slot in a smooth,
continuous motion until it seats firmly.
3. Give the unit to the customer for PIN entry.
4. Remove the card once the display indicates the transaction is
complete.
Note:
Do not remove the card from the smart card reader until the
transaction is complete as this may void the transaction.
17