It is hereby stated that the product automatic system 230 Vac for sliding gates BISON 20 OM - BISON 25 OTI is compliant with provisions set forth in the following EC Directives: - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004, on the harmonisa- tion of the laws of Member States relating to electromagnetic compatibility and which cancels Directive 89/336/EEC, according to the following harmonised regulations: EN 61000-6-2:2005, EN 61000-6-3:2007.
Page 4
Figure 2 (ref. C). BISON 20 OM 230VAC, for gates with 2000 kg max weight The plate should be positioned at 15mm from the floor (with BISON 25 OTI 230 VAC (with three-phase motor and Inverter) possible adjustment +/- 5mm), 15 mm above floor-level...
Page 5
HOW TO FIT THE RACK Key of components: Place the D spacers (Fig. 8) and weld or fit them with screw Gear motor with BISON built-in control unit. s onto the gate, keeping to overall dimensions shown in Rack Figure 2, taking also account the possible adjustment of the Limit switch brackets foundation plate shown in Figure 7.
Page 6
BISON USER’S HANDBOOK SAFETY MEASURES WASTE DISPOSAL As indicated by the symbol shown, it is for- bidden to dispose this product as normal urban waste as some parts might be harmful failure but contact the specialised personnel. for environment and human health, if they MANUAL OPERATION are disposed of incorrectly.
Need help?
Do you have a question about the BISON 20 OM and is the answer not in the manual?
Questions and answers