INTRODUCTION If only the control unit is to be reached, it is sufficient to remove the 4 “A” screws by lifting the upper cover. Congratulations on your choice of a BISON gear motor. The niches for the photocell mounting (F) are provided on All items included in Benincà’s wide product range stem the motor removable side.
HOW TO ADJUST THE GEAR MOTOR HEIGHT WIRE DIAGRAM As indicated in the previous paragraph, height is adjusted by Figure 13 shows the cables to the preset for the installation using grub screws K which are placed on the plate. Should of the gear motor and the main accessories.
BISON USER’S HANDBOOK SAFETY MEASURES WASTE DISPOSAL • Do not stand within the gate movement area. As indicated by the symbol shown, it is • Children must not play with controls and near the gate. forbidden to dispose this product as normal •...
Need help?
Do you have a question about the JUGGERNAUT and is the answer not in the manual?
Questions and answers