Input Settings - almando Multiplay Surround Decoder Installation And Operating Instructions Manual

Input Settings

For each individual input you make various settings separately. To do this, just turn on
the source player at the input you want to configure and start playback.
The active input is highlighted in its color, and a badge on the navigation icon for the
input settings in the bottom right also shows its name. Click on this navigation icon and
you will be taken to a new page where you can make the specific settings for exactly
this input – for example SPDIF 2 (TV) shown here.
18
In the area of DOWNMIX you can
determine on which speakers the
playback should take place, if this
input is active. The first number
means the number of front speakers.
The number after the slash indicates
the number of rear speakers. So you
can, for example, when watching TV,
play the sound in full surround sound
(HDMI: 3/2) and in contrast, let your
B&O system run in stereo only via the
two front speakers (DIN: 2/0).
For the sound settings, you can raise
or lower the level of treble and bass by
up to 12 dB each. And you also have
the option to enable or disable
loudness.