Step 4: Connect The Multiplay Surround Decoder To The Power Supply; Step 5: Check The Bluetooth Settings At The Smartphone (Or Tablet); Step 6: Start The Almando App - almando Multiplay Surround Decoder Installation And Operating Instructions Manual

Step 4: Connect the Multiplay Surround Decoder to the Power Supply

Step 5: Check the Bluetooth Settings at the Smartphone (or Tablet)

Open your smartphone settings and check if Bluetooth is enabled.
Then, open the Bluetooth settings on your smartphone and scan for new available
Bluetooth devices in the area.
There should be a new device found that starts with the name "Almando". If this is not
the case, press the small push button on the almando Multiplay Surround Decoder to
the right of the HDMI socket (or disconnect the device from the power supply and
reconnect it). Restart the scan on your smartphone within 30 seconds.
When the almando device is displayed, click on it to pair the Almando Multiplay
Surround Decoder with your smartphone.

Step 6: Start the almando App

After a successful pairing, you can start the almando App and the main screen
CONTROL appears.
12
After you have connected all speakers
and sources, connect the almando
Multiplay Surround decoder to your
power supply.