Input Settings - almando Multiplay Surround Decoder Installation And Operating Instructions Manual

Input Settings

For each individual input you can make various settings separately.
To do this, turn on the source you want to configure and start playback. The sources
on all other inputs should be turned off.
The active input is highlighted in color and only there a gear icon appears to the left of
the input name.
Many setting options are available for all inputs - some special parameters can only be
set for certain inputs.
For this reason, the configurations of all inputs are explained in the following and
recommendations are made.
Click on the gear icon and you will be
taken to a new page, where you can
make the specific settings for that
particular input - e.g. for DIN (B&O
Powerlink).
19