almando Multiplay Surround Decoder Installation And Operating Instructions Manual page 16

If no devices are connected to certain
inputs, they can be deactivated here.
They will then be hidden on the main
screen of the app. This setting can be
undone later at any time.
Although some TVs have an HDMI-
CEC connection, they require
additional parallel cabling with an
optical cable (Toslink / SPDIF). In this
case, connect it to the SPDIF 2 (TV)
input and enable this function to pair
the HDMI and SPDIF 2 (TV) inputs.
Click on this button to get to the page
for displaying and updating the
firmware. If a new firmware for your
device is available on the almando
server, then this line is colored red and
a badge on the navigation icon for the
settings displays the message "FW".
Here you can reset your device to
factory defaults.
If you want to restart your device, you
can click here - this has the same
function as disconnecting the device
from the mains for a few seconds.
If you need information on installing or
operating your device, you can
download the instruction manual as a
PDF and have it displayed by clicking
here this button.
Further information can be found on
our website, which you can visit by
clicking on this button.
16