Sony Handycam DCR-TRV510 Operating Instructions Manual page 77

Changing the MENU settings
Note
When you let the subject monitor the shot (Mirror mode), the menu display does not
appear.
Menu items are displayed as the following seven icons:
CAMERA SET
VTR SET
LCD/VF SET
MEMORY SET
TAPE SET
SETUP MENU
OTHERS
Selecting the mode setting of each item
Menu items differ according to whether the POWER switch is set to VTR or CAMERA.
Icon/item Mode
D ZOOM
r OFF
16:9WIDE r OFF
STEADYSHOT r ON
N.S. LIGHT r ON
* This item is displayed only when the STANDBY switch is set to STANDBY.
Notes on the SteadyShot function
•The SteadyShot function will not correct excessive camera-shake.
•Attachment of a conversion lens (not supplied) may influence the SteadyShot
function.
•SteadyShot does not operate in the 16:9WIDE mode. If you set STEADYSHOT to ON
in the MENU settings, the
Meaning
ON To activate digital zoom. More than 20 to 360
zoom is performed digitally (p. 17)
To prevent the deterioration of the picture quality
—
ON To record a 16:9 wide picture (p. 29)
To compensate for camera-shake
OFF To cancel the SteadyShot function. Natural
pictures are produced when shooting a stationary
object with a tripod.
To use the NightShot Light function (p. 20)
OFF To cancel the NightShot Light function
indicator flashes.
r is the factory setting.
POWER
switch
CAMERA
CAMERA*
CAMERA
CAMERA
77