Recording Still Images In The Built-In Flash Memory - Memory Photo Recording - Sony Handycam DCR-TRV510 Operating Instructions Manual

Recording still images in the built-in flash
memory – Memory photo recording
You can store still images in the built-in flash memory.
(1) Set the POWER switch to CAMERA.
(2) Turn STANDBY to MEMORY.
(3) Keep pressing PHOTO lightly. The picture freezes and the CAPTURE
(4) Press PHOTO deeper. The image displayed on the screen will be recorded in
1
When the STANDBY switch is set to MEMORY
The following functions do not work:
– Wide mode
– Digital effect
– Picture effect
– Nightshot + Slow shutter
– Low lux mode of PROGRAM AE
When you are recording a still image
You can neither turn off the power nor press PHOTO.
When you press the PHOTO button on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
58
indicator appears in the vienfinder or on the LCD screen. Recording does not
start yet.
the built-in flash memory. Recording is complete when the bar scroll indicator
disappears.
POWER
CAMERA
OFF
VTR
3
PHOTO
4
STD 1 / 3 3
CAPTURE
2
START/STOP
STD
PHOTO