Krups Nespresso Vertuo Plus Manual page 9

CUP SUPPORT
POWER CABLE
11065_UM_ARES_C_Krups.indd 9
1 The cup support has 4 positions
and can be temporarily removed
to accommodate various cup
sizes.
1 The power cable can be adjusted under the machine. Insert
the remaining cable in the guide on the left or on the right
side socket, depending on the position chosen for the water
tank. Ensure machine is in the upright position.
2 To place the cup support, slide cup support straight into
the holes and gently push down until the hooks are well
in place.To remove it, gently lift straight up and then pull
the cup support out.
2
1
CAUTION:
Be careful
when removing the cup support since
it may contain warm liquid.
Make sure the cup support is properly
placed before putting the cup.
EN
9
16.05.17 14:03