MACHINE HANDLING
EN
WATER TANK
1 The water tank arm can be rotated and positioned
CAPSULE CONTAINER
1 Remove the water tank, then remove the capsule
8
11065_UM_ARES_C_Krups.indd 8
at the back, to the left or to the right hand side of the
machine.
container by sliding it sideways.
2 Remove the water tank by tilting it slightly backwards,
then gently pulling it up.
1
2
Put the water tank in position by placing it vertically onto
its arm, until there is a 'click' sound.
WARNING:
Be careful when removing the water tank since the
machine may tilt during the movement.
2 Place the capsule container in the back of the machine
by sliding it sideways into position. It is held in place by
a magnet.
Place the water tank back.
16.05.17 14:03