Reset To Factory Settings - Krups Nespresso Vertuo Plus Manual

RESET TO FACTORY SETTINGS

NOTE:
Choose special function by pressing the lever down: 1 time for "Descaling". 2 times for "Emptying the system". 3 times for "Reset to factory settings"
1 Turn the machine "OFF" by pushing the lever down
3 sec.
3 Choose function by pressing the lever down:
3 x
4 Push the button to confirm.
3 x
/
3 sec.
11065_UM_ARES_C_Krups.indd 17
for 3 seconds.
- 3 times for "Reset to factory settings"
NOTE:
the machine will blink 3 times every
2 seconds until the button will be pressed.
ORANGE light will blink 3 times in 3 seconds to
confirm reset is done and then go to steady GREEN.
The machine is now ready to use.
2 To enter "Factory settings" mode, push the button
and the lever down at the same time for 3 seconds.
ORANGE steady light indicates entry into the Special
Functions menu.
3 sec.
NOTE:
Choose function within 2 minutes or else the machine will go back to
Ready mode. ORANGE light will blink 3 times every 2 seconds, indicating the "Factory
reset" function.
NOTE:
It is possible at any time to exit the Special Functions menu by
pushing the button and pressing the lever down at the same time for 3 seconds.
GREEN steady light indicates the machine is ready.
EN
17
16.05.17 14:03