Searching For The Starting Point; Search); Reviewing The Most Recently Recorded Scenes (Rec Review) - Sony Handycam HDR-HC9 Operating Manual

Searching for the starting point
END SEARCH will not work once you
eject the cassette after you have recorded on
the tape.
Make sure that the CAMERA-TAPE
lamp lights up (p. 23).
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
Make sure that the CAMERA-TAPE
lamp lights up (p. 23).
Touch
1cn>1 -.
I
@J
I.
Touch
1cn>1-.
8IJ.
(;!!!]60min x 1
END SEARCH
EXECUTING
0:00:00
Q!!I60min
HDV1080i
STBY 0:00:00
32
L:::::::======~
CANt"
L
Touch here to cancel the operation.
The last scene of the most recent
recording is played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
" Notes
• END SEARCH will not work correctly when
there is a blank section between recorded
sections on the tape.
'Q'Tips
• You can also select [END SEARCH] from the
menu. When the PLAYIEDIT lamp lights up,
select the [END SEARCH] short-cut in Personal
Menu (p. 39).
The last 2 seconds (approx.) of the most
recently recorded scene are played back.
Then, your camcorder is set to standby.
Slide the POWER switch repeatedly to
turn on the PLAY/EDIT lamp, then
operate the Remote Commander (p. 28).
....REW
PLAY
STOP
DISPLAY
ZERO SET
MEMORY