Searching For The Starting Point; Reviewing The Most Recently Recorded Scenes (Rec Review) - Sony HVR-A1E Operating Manual

Searching for the starting point

Make sure that the CAMERA-TAPE lamp
lights up (p. 22).
Searching for the last scene of the
most recent recording (END SEARCH)
END SEARCH will not work once you
eject the cassette after you have recorded
on the tape.
Touch .

60min 1 00:00:00:00
END SEARCH
EXECUTING
CANCEL
The last scene of the most recent
recording is played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
• END SEARCH will not work correctly
when there is a blank section between
recorded sections on the tape.
• You can also select [END SEARCH] from
the menu. When the PLAY/EDIT lamp
lights up, select the [END SEARCH] short-
cut in Personal Menu (p. 38).
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
Touch
The last 2 seconds (approx.) of the most
Touch here
recently recorded scene are played back.
to cancel the
Then, your camcorder is set to the standby.
operation.
Reviewing the most recently
recorded scenes (Rec review)

60min STBY
.
00:00:00:00
31