Elmo ST-600D Instruction Manual page 15

Volume control
Balance control
o
Insert the film leader into the thread slot
as indicated by the red arrow. The film
will automat ica lly thread to t he take-up reel
through the film gu id e.
CAUTION : If the film fails to attach itse lf
to the tak e· up reel, reverse the '
main contro l knob to the
°b
F
position and then attach the
leader to the take·up reel
manually.
o
Set the main control knob to the
C1~
position
to turn the lamp ON. Wi t h this operation , the
auto-thread lever will release auto mati cal ly .
o
Adjust the volume by turn ing the volume con-
trol knob. [Outside knob is balance contro l.
(Refer to page 5.)
1
Note: The replayed sound is inaudible if
the motor switch is set at other than
the
Ck
position.
13