Projection; Preparing For Projection - Elmo ST-600D Instruction Manual

PROJECTION
Preparing For Projection
o
Place the projector on a stable stand or table and face the projection lens to
t he sc reen.
Note:
8
Be sure to use a firm stand. If the projector is mounted on an
unsteady surface such as a thin-board box, a possible resonance may
develop ca using poor projection performance.
8
Plug the power cord.
o
Pull both reel arms up into position.
o
Place your film on the front arm and the
take-up reel on the rear arm. Press the reel
locks until the reels are snug against the
sp indl es.