Exciter Lamp (Model M-O Only) - Elmo ST-600D Instruction Manual

o
In sert the lamp all the way int o the socket
and swin g down the lamp ejecto r.
Important:
Avoid touching glass bulb area with you r bare
fingers. Oil from your fingers will affect the
heat conductivity of the glass and will shorten
the I ife of the bu lb. Touch only the base or
use cotto n gloves or cloth when installing a
new lamp .
• Exciter Lamp (Model M-O only)
• Use exc iter lamp ANSI code BRS or equ ivalent .
O Pul1 the cove r down to open.
8
Take hold of the lamp head and t urn it
counterc lockw ise to remove .
riIiiiii _ _ _ _ _ _
;;;.r;;:::;o;;;~
. .
=-__
0
To in sta ll a new lamp, ali gn the holes on
Notch
34
t he lamp base with the three guide pins of
the socket ' and turn c lockwise until the
holes are snug aga in st the pins. The notch
in the lamp base should be facing forward .