BIG ASS FANS Haiku A0 Series Installation Manual page 10

MOUNTING (CONT.)
Step 2. Installing the lower cover
With the fan still positioned upside-down on the work aid, remove the protective covering from the
bottom of the fan. With the fan still in the upside-down position, align the three tabs on the lower cover
with the three slots in the undersides of the airfoils and secure.
Haiku Bamboo
For Haiku Bamboo, simply snap the lower cover to the bottom of the fan hub.
Haiku
For Haiku, position the lower cover, and then place both hands flat on the cover and turn clockwise to lock
the lower cover into place.
Lower
Cover
Step 3. Installing the wiring cover and trim
With the fan in the upright position, remove the protective
covering from the extension tube.
Slide the wiring cover and wiring cover trim over the
extension tube, resting them on the fan hub.
6
Lower
Cover
Wiring
cover
©2012 DELTA T CORP. ALL RIGHTS RESERVED.
Wiring
cover trim