Function Setting - JUKI DDL-8000A Instruction Manual

4-6. Function setting

The set value of the function setting can be changed.
A
❼ to flash function setting No. A on and off. In this state, press
2) Press
the function setting number you want to set.
(The figure shows the function setting No. P08, that is used for setting the number stitches to be sewn
using the soft-start function.)
❼ to flash setting No. B on and off. In this state, change the set value by pressing
3) Press
❻ .
❽ to determine the set value.
4) Press
 to return the sewing machine to the normal sewing state.
5) Press
In the case of changing the set value for other function setting number, repeat the steps of procedure 2), 3)
and 4). Then, finally carry out step of procedure 5).
6) The function setting items are classified into two different levels; user level and service level.
In the case of displaying the function setting items that are classified to the service level, turn the power
ON while keeping
❻ ❼
B
 held pressed.
1) The function setting screen is displayed
by keeping
three seconds in the normal sewing

state.
A indicates the function setting number.
❽
B indicates the set value for that func-
tion setting number.
– 31 –
 held pressed for
❻ to select