JUKI DDL-8000A Instruction Manual page 43

No. Item
P138 Function of pedal curve
selection
P139 Function of reverse feed
stitching on the way
P140 Number of stitches of
reverse feed stitching on the
way
P141 Condition to be satisfied
to enable the reverse feed
stitching on the way while
the sewing machine is at
rest
P142 Thread trimming function
after performing reverse
feed stitching on the way
P143 Sewing speed for reverse
feed stitching on the way
P145 ON/OFF of the data output
to JANET
P146 Waiting time to start opera-
tion of thread pulling cylinder
P147 Thread pulling cylinder ON
time
P148 Time until sewing starts
after turning OFF the thread
pulling cylinder
＊
P149 Back-tack solenoid ON
parameter
＊
P150 Back-tack solenoid OFF
parameter
P151 ON/OFF of the bird's nest
preventing operation
P152 Waiting time until the wiper
cylinder starts operation
P153 Wiper cylinder ON time
P154 Time until sewing starts
after turning OFF the wiper
cylinder
P155 Wiper output duty
P159 Suction ON/OFF
P160 Suction time
P161 The presser foot lifting
operation ON/OFF when the
thread clamp works
P162 The angle at which the
presser foot starts going
up when the thread clamp
works.
P163 Ending angle of soft start for
the thread clamp
P164 Setting of the lifting amount
of the presser foot when the
thread clamp works
P165 Time during which the
presser foot goes up when
clamping the thread
P166 1st electric current time for
thread clamp
＊ Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time
of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to
change the set value, please purchase the Engineer's Manual and follow the instructions.
Description
Pedal curve is selected. (Improving pedal inching operation)
2
Sewing speed
0
The function activated when the reverse feed stitching on the way
switch is pressed is selected with this function setting item.
0: Normal back-tack function
1: Function of reverse feed stitching on the way is enabled
The number of stitches of reverse feed stitching on the way is set
with this function setting item.
The condition to be satisfied to enable the reverse feed stitching
switch while the sewing machine is at rest is set with this function
setting item.
0: Disabled while the sewing machine is at rest
1: Enabled while the sewing machine is at rest
Automatic thread trimming operation after performing the reverse
feed stitching on the way is set with this function setting item.
0: Automatic thread trimming is not performed after the comple-
tion of reverse feed stitching on the way
1: Automatic thread trimming is performed after the completion
of reverse feed stitching on the way
Sewing speed during the reverse feed stitching on the way is set
with this function setting item.
Output of data to JANET is set with this function setting item.
0: Data is not output to JANET
1: Data is output to JANET
Waiting time until the start of operation of the (bird's nest prevent-
ing) thread pulling cylinder is set with this function setting item.
The time to turn ON the (bird's nest preventing) thread pulling
cylinder is set with this function setting item.
The waiting time required until the sewing machine starts next
sewing after turning OFF the (bird's nest preventing) thread pull-
ing cylinder is set with this function setting item.
Back-tack solenoid ON parameter
* Refer to the explanation of operation of the BT solenoid in the
Engineer's Manual for details.
Back-tack solenoid OFF parameter
* Refer to the explanation of operation of the BT solenoid in the
Engineer's Manual for details.
(Bird's nest preventing) ON/OFF of the bird's nest preventing
operation is set with this function setting item.
(Bird's nest preventing)The waiting time required until the wiper
cylinder starts operation is set with this function setting item.
(Bird's nest preventing) ON time of the wiper cylinder is set with
this function setting item.
(Bird's nest preventing) The waiting time required until the sewing
machine starts the next sewing after turning OFF the wiper cylin-
der is set with this function setting item.
(Bird's nest preventing) ON duty of the wiper output is set with this
function setting item.
(Bird's nest preventing) ON/OFF of the suction device is set with
this function setting item.
(Bird's nest preventing) Suction time is set with this function set-
ting item.
The presser foot lifting operation ON/OFF when the thread clamp
works is set with this function setting item.
0: OFF 1: ON
The angle at which the presser foot starts going up when the
thread clamp work is set with this function setting item.
The ending angle of the soft start for the thread clamp is set with
this function setting item.
* Refer to the explanation of operation of the thread clamp
solenoid in the Engineer's Manual for details.
The lifting amount of the presser foot when the thread clamp
works is set with this function setting item.
The time during which the presser foot goes up when clamping
the thread is set with this function setting item.
Period of time during which the 1st electric current is fed applied
to the thread clamp is set with this function setting item.
* Refer to the explanation of operation of the thread clamp sole-
noid in the Engineer's Manual for details.
– 40 –
Level
U
1
Pedal stroke
U
U
U
U
U
S
U
U
S
S
S
U
S
U
S
S
S
S
S
S
U
S
S
U
Setting range Default
0-2 0
0-1 0
1-19 4
0-1 0
0-1 0
200-3000 1900
(sti/min)
0-1 0
0-990 150
0-990 120
0-990 30
50-100 50
2-500 2
0-1 0
0-990(ms) 10
0-990(ms) 150
0-990(ms) 30
0-100(%) 90
0-1 1
5-5000(ms) 500
0-1 0
0-359 100
0-359 340
0-500 50
1-990 20
1-990 7