Operation Panel - JUKI DDL-8000A Instruction Manual

4-2. Operation panel

❽

How long the key
No.
must be pressed
Short time
❶
Long time
Short time
❷
Long time
Short time
❸
Long time
Short time
❹
Long time
Short time
❺
Long time
Short time
A
❻
Short time
B
❶ ❷ ❸
Used to changing over the automatic reverse feed stitching at the begin-
ning of sewing to: Reverse feed stitching / Double reverse feed stitching /
Disable
Used to change over the thread clamp operation between enable / disable
Used to change over the automatic reverse feed stitching at the end of
sewing to: Reverse feed stitching / Double reverse feed stitching / Disable
Used to change over the needle bar stop position at the time of stopping
the sewing machine between up and down
Used to set the type of stitching to free stitching
Used to change over the thread trimming operation between enable / dis-
able.
Used to set the type of stitching to overlapped stitching
Used to change over the lifting of the presser foot during sewing between
"automatically lift / not lift".
Used to carry out setting of the polygonal-shape stitching.
Used to changeover the automatic lifting of presser foot after thread trim-
ming between lift / not lift
Used to increase the maximum sewing speed
Used to decrease the maximum sewing speed
– 23 –
❼ -A ❻ -A ❼ -B
❹
❺ ❾ 
Function


❻ -B