Table of Contents
Advertisement
Cleaning and care
Cleaning the front of the
appliance and the side panels
If soiling is left on for any length of
time, it may become impossible to
remove. Surfaces may suffer
discolouration or damage.
Therefore, it is best to remove soiling
from the appliance front and side
panels immediately.
All surfaces are susceptible to
scratching. Contact with unsuitable
cleaning agents can alter or
discolour the surfaces.
See the information on "Cleaning
agents" at the beginning of this
section.
Clean the surfaces with a clean
sponge and a solution of warm water
and washing-up liquid. A clean, damp
microfibre cloth without cleaning
agent can also be used.
After cleaning, wipe with clean water
and dry with a soft cloth.
44
Stainless steel appliances
Appliance front
Risk of damage as a result of
incorrect cleaning.
The front finish (CleanSteel) will be
damaged.
Do not use a stainless steel
cleaning agent on this surface.
The appliance front has a high quality,
special finish (CleanSteel). It is resistant
to soiling and is very easy to clean.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (e.g. use the
dusting brush for Miele vacuum
cleaners)
Hide quick links:
Advertisement
Table of Contents
