Miele KFN 28132 D ws Operating And Installation Instructions page 51

Display warnings
Message
The alarm symbol 
and the temperature
display are flashing.
"F0 to F9" appears in
the display.
The  symbol lights up
in the display, the
appliance does not get
cold, although the
controls and the interior
lighting are working.
Cause and remedy
The temperature alarm has been activated (see
"Temperature and door alarm"). The temperature in
the freezer section has risen higher or fallen lower
than the temperature set.
Possible reasons for this include:
– The appliance door has been opened too
frequently.
– A large quantity of fresh food has been placed in
the freezer without switching on the SuperFreeze
function.
– A prolonged power cut (mains outage) has
occurred.
 Rectify the cause of the alarm.
The alarm will stop and the alarm symbol  will go
out when the temperature reaches the correct level
again.
 Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, it should
be used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
There is a fault.
 Call the Miele Service Department.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
 Contact the Miele Service Department for
information on deactivating Demo mode.
Problem solving guide
51