Procom ECON-A-4C Operating Instructions Manual page 12

To go to next menu press Start Switch the LCD shall display "Protection
Parameter" To enter Protection Parameter setting mode press Next Switch.
For any change in value, press
parameter, press Next Switch.
To go to next menu press Start Switch the LCD shall display "Comm Rs485
Parameter"To enter Comm RS-485 Parameter setting mode press Next
Switch. For any change in value, press
For next parameter, press Next Switch.
To go to next menu press Start Switch the LCD shall display
"Display History" To View Display History mode press
To go to next menu press Start Switch the LCD shall display "Display Event"
To View Display Event mode press
To go to next menu press Start Switch the LCD shall display "Display
Start/Stop" To View Display Start/Stop mode press
To go to next menu press Start Switch the LCD shall display
"Reset Service Alarm"
To enter Reset Service Alarm mode press Next Switch. The LCD shall display
The unit shall ask for confirmation to reset the service hours pressing desired
Switch.
To go to next menu press Start Key the LCD shall display "Adjust Clock" To
enter Adjust Clock setting mode press Next Key. For setting up of the time,
press Start switch and
Press Next Key the LCD shall display DD/MM/YYYY. For setting up of the
date, press
To go to next menu press Start Key the LCD shall display "Reset Password"
To enter Reset Password setting mode
Press "Enter Password" then Press
shall display "
Operating Instructions
"Press START to Reset
Press STOP to ESC"
Stop switch.
Start switch and
Press START to Change
Press STOP to ESC"
Start switch and
Start switch and
Next Switch.
Stop switch
"Change Password" the LCD
Stop switch. For next
Stop switch.
Next Switch.
Next Switch.
Page - 10