GE MDS SD Series Technical Manual page 44

Category
36
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8461-MDS-UP-SD9-MS2ES-Upgrade-Key-SD9-MS-to-SD9-ES.aspx
Table 11. Common Tasks with Device Manager (Continued)
Task
If you wish to...
Set RF Output Power, Modem Type, RX/TX
Frequency
View/Set Soft-Carrier Dekey status, RX/TX
Time-Out options
Data-Key and RTS-Key settings (ON/OFF)
Push-to-Talk/Clear-to-Send Delay times (ms)
Automatic Frequency Correction (AFC) setting
Switched Carrier ON/OFF setting (B Modems)
Configure Listen-Before-Transmit (LBT)
collision avoidance
View Received Signal Strength (RSSI) level
Key the radio transmitter, view power output
Monitor local radio emissions for possible
interference
View Serial No., Model 1 (hardware), Model 2
(software) version, Firmware Version, Build
Date
Set Owner Name/Message, enable/disable
Sleep Mode, set COM LED mode, Radio Mode
Configure time delays to identify packets on
serial ports
Configure Media Access Control (MAC) settings
Configure Unit ID and/or DLINK diagnostics
settings
SD Series Technical Manual
Refer to this Screen
Configuration>>Radio,
Basic Settings, Page 39
Configuration>>
Radio>>
Advanced Settings, Page 45
Configuration>>
Radio>>
Advanced Settings, Page 45
Configuration>>
Radio>>
Advanced Settings, Page 45
Configuration>>
Radio>>
Advanced Settings, Page 45
Configuration>>
Radio>>
Advanced Settings, Page 45
Configuration>>
Features>>
LBT Settings, Page 47
Maintenance & Status>>
Performance, Page 57
Maintenance & Status>>
Radio Test>>
RF Keying Test, Page 60
Maintenance & Status>>
Radio Test>>
Spectrum Graph, Page 60
Overview>>
SD Summary, Page 34
Configuration>>
Radio>>Device Settings,
Page 41
Configuration>>
Radio>>
Packet Settings, Page 42
Configuration>>
Radio>>
Media Access Control>>
Settings, Page 43
Configuration>>
Radio>>
Diagnostic Settings, Page
44
MDS 05-4846A01, Rev. D