Table of Contents
Advertisement
Maintenance
Information and Precautions
Akt, OY A
ae
To Reattach the Eyecup
'
et
(1) Reptace the smail tens inside the viewtinder. (2} Align the groove on the eyecup with the » mark on the
barrel. (3) Turn the ayecup clockwise.
To ensure clear pictures, clean the video heads periodically. When playback pictures are "noisy", or hardly
visible, the vKieo heads may be contaminated.
Precautions
[a] Slight contamination
[b] Critical contamination
builieseder Onerion
if this happens. clean the video heads with the Sony V8-25CLH cleaning cassette {not supplied). After
« Operate the Set neda SHO oF ialinay ess bes WAC Bou deena:
checking the picture, Hf itis stil "noisy". repeat the cleaning. (Do not repeat cleaning more than 5 times.)
+ For DC or AC operation. use the accessories recommended in this manual
» Should any solid object or liquid tail into the casing. disconnect the plug ol the camcorder and have it
checked by qualified personnal betore operating it any further.
« Be not hold the camcorder by the viewtinder.[a]
* Avoid rough handling or mechanical shock. Be particularly careful of the lens.
» Keep the lens cap an the lens when not using the camera.
* Do not wrap up the camcorder and operate it since heat may build up internally.
» Keep the camcorder away from sirong magnetic fields or mechanical vibration.
Caution
Do not use a commercially available wet-type cleaning cassette. It may damage the video heads.
Note
if the VB-25CLH cleaning cassette 1s not available in your area. consult your Sony service facility.
Removing Dust from inside the Viewfinder
.
oe
+ Da not let sand get into the camcorder. When you use the camcarder on a sandy beach or dusty
=
place. protect it from the sand or dust. Sand or dust may cause the unit to malfunction and
(1) While holding down the switch on the viewfinder barrei, turn the eyecup in the direction of the arrow and
sometimes the malfunction cannot be repaired.[b]
pull if up to detach it. (2} Remove the smail lens trom inside of the wiewtinder. (3) Clean the surtace of the
+ Do not let the camcorder get wet. Keep the camcorder from rain or sea water. It may cause a
screen with a commercially available blower.
maifunction and sometimes the malfunction cannot be repeired.[c]
SUOIINEI
g PUB
UONLUUOJU
BIUEUA]WE
38
39
Advertisement
Table of Contents
