Sony DVCAM DSR-PD170P Operating Instructions Manual page 108

Changing the menu settings
Icon/item
CH SELECT
AUDIO MIX
A/VtDV OUT
NTSC PB
VF POWER
LCD B. L.
LCD COLOUR
VF B.L.
GUIDEFRAME
Notes on LCD B.L. and VF B.L.
•When you select "BRIGHT," battery life is reduced a little during recording.
•When you use power sources other than the battery pack, "BRIGHT" is automatically
selected.
108
Mode Meaning
z CH1, CH2 To play back the CHs 1/2 audios from each
channel. However, if you play back the
audios via the camcorder's speaker, the
audios are mixed.
CH1 To play back the CH1 audio from both
channels 1/2.
CH2 To play back the CH2 audio from both
channels 1/2.
— To adjust the balance between the channels
1/2 (CH1/2) and channels 3/4 (CH3/4)
(p. 88).
z OFF To output analog images in digital format
using your camcorder.
ON To output digital images in analog format
using your camcorder.
z ON PAL TV To play back a tape recorded on your
camcorder on a PAL system TV.
NTSC 4.43 To play back a tape recorded in the NTSC
colour system on a TV with the NTSC 4.43
mode.
z AUTO Does not display pictures on the viewfinder
when LCD panel is opened.
ON Display pictures on the viewfinder when
LCD panel is opened.
z BRT NORMAL To set the brightness on the LCD screen to
normal.
BRIGHT To brighten the LCD screen.
— To adjust the colour on the LCD screen with
the SEL/PUSH EXEC dial.
To get low-
intensity
z BRT NORMAL To set the brightness on the viewfinder
screen to normal.
BRIGHT To brighten the viewfinder screen.
z OFF Does not display the guide frame.
ON Displays the guide frame (p. 36).
CH1 CH3
2 4
POWER
switch
VCR
VCR
VCR
VCR
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
To get high-
intensity
VCR
CAMERA
MEMORY
CAMERA
MEMORY