Sony DVCAM DSR-PD170P Operating Instructions Manual page 84

Recording video or TV programs
Using an i.LINK cable
Simply connect the i.LINK cable (optional) to
DV products. With digital-to-digital connection, video and audio signals are
transmitted in digital form for high-quality editing.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder,
(2) Set the POWER switch to VCR.
(3) Set DISPLAY in
(4) Press MENU to erase the menu display.
(5) Press z REC and the button on its right simultaneously on your camcorder,
(6) Press N on the VCR to start playback. The picture to be recorded appears on
(7) Press X on your camcorder at the scene from which you want to start
: Signal flow
When you have finished recording
Press x on both your camcorder and the VCR.
Using the Remote Commander
In step 5, press z REC and MARK simultaneously, then immediately press X. And in
step 7, press X at the scene from which you want to start recording.
84
and insert the recorded tape into the VCR.
then immediately press X on your camcorder.
the LCD screen or in the viewfinder.
recording.
to LCD in the menu settings (p. 105).
5
REC
DV Interface
i.LINK cable
(optional)
DV Interface and to DV Interface of the
PAUSE
i.LINK