Sony DVCAM DSR-PD170P Operating Instructions Manual page 89

Audio dubbing
Notes
•New sound cannot be recorded on a tape already recorded in Fs48K mode (p. 110).
•New sound cannot be recorded on a tape already recorded in the DV format.
•You cannot add audio with the DV Interface.
If you make all the connections
The audio input to be recorded will take precedence over others in the following order.
•AUDIO CH1/CH2 jacks
•INPUT1/INPUT2 connectors
If an i.LINK cable (optional) is connected to your camcorder
You cannot add sound to a recorded tape.
If you set the write-protect tab of the tape to lock
You cannot record on the tape. Slide the write-protect tab to release the write protection.
We recommend that you add new sound on a tape recorded with your camcorder
If you add new sound on a tape recorded with another camcorder (including an other
DSR-PD170P), the sound quality may deteriorate.
On blank portions
You cannot add an audio.
When dubbing through the INPUT1/INPUT2 connectors
You can adjust the recording level manually (p. 53).
89