Advertisement
1. Slide the THq motor into the opening
on the end of the post clamp
assembly and push it down firmly.
The unit will lock in place.
2. To release the THq, press the black
button on the back of the opening
of the post clamp assembly and lift
the motor from the cradle.
3. Slide the post clamp assembly
down over the end of the post until
the clamp is at the desired height
and lock in place.
Stand Mounting
Push to lock
into Clamp
Clamp
Release Button
Clamp
12-118
Stand
S1000
(sold separately)
Advertisement
