Display Settings - CH A1.5 User Manual

RCA 300 Ohms
RCA Hi-Z
AMPLIFIER MODE Stereo
Mono active bi-amp
Mono passive bi-amp
Bridge
Monaural 1
Monaural 2
GAIN 24 dB range by 0.5 dB
steps
GAIN 1 / 24 dB range by 0.5 dB
GAIN 2 steps
INPUT BOARD Left, Right
4.3.1.2

DISPLAY SETTINGS

The following table details the parameters of the DISPLAY SETTINGS menu:
PARAMETER PARAMETER VALUES
DISPLAY MODE Status
Power
Temperature
Off
FRONT LED On
Off
BRIGHTNESS NORMAL 10%
34
2 input boards
2 input boards, 2 amps
2 amps
2 amps
2 amps
2 amps
Stereo, mono or bridge
mode
Bi-amp mode
2 input boards + passive
bi-amp, mono or bridge
mode
Details of AUDIO SETTINGS menu parameters
The A1.5 SETUP >> DISPLAY SETTINGS menu allows configuration of the display
related parameters of the unit. Accessible parameters are:
- DISPLAY MODE:
- FRONT LED:
- BRIGHTNESS NORMAL:
- BRIGHTNESS DIMMED:
- COLOR:
- GAMMA SCALE:
REQUIRED OPTIONS
None
None
None
A1.5 User Manual
None
None
In passive bi-amp mode, channels 1 and 2 can only
have a gain difference of up to 6 dB
Selects what is displayed in normal mode
Selects if the front LED is turned on
Sets the normal display brightness
Sets the dimmed display brightness
Selects the display color
Fine tunes the AMOLED's display RGB gamma curve
REMARKS
Selects what to display when the unit is idle for several
seconds: General status page, power-meter, temperature
gauges or turn off the display.
Allows to keep the front LED on when the unit is on.
Sets the display brightness when the unit is operated.
Rev 1.0