Table of Contents
Advertisement
3.4 Power cord receptacle and voltage selection
Make sure that the voltage selection is set to the correct value with respect to the AC voltage in your location. Connect the IEC C19
power cord to the IEC C20 power cord receptacle and plug the power plug to an AC wall outlet only after all other connections were
made.
If third-party power cords are used, make sure that the socket mating with the A1.5 is fully inserted and not able to move and
create intermittent contacts due to its own weight.
3.5 Amplifier modes
This section describes the most standard setups in which one or multiple A1.5 amplifiers can be integrated into.
3.5.1 Stereo mode
A single A1.5 equipped with two analog input boards can be used as a stereo power amplifier. This is the simplest configuration
that already allows to enjoy the unique sound of the A1.5 amplifier. The picture below shows how the stereo mode should be
wired.
Rev 1.0
Stereo mode
A1.5 User Manual
19
Advertisement
Table of Contents
