Shortcuts Mode - CH A1.5 User Manual

4.2.2 Shortcuts mode

The A1.5 amplifier is configured by a set of menus as described in the next sections. To allow quick access to the most frequently
used settings, the A1.5 offers the concept of Shortcuts. Shortcuts are fully programmable and the user may choose almost any
configuration parameter as a Shortcut. There are up to 6 user programmable Shortcuts. To learn how to program individual
Shortcuts, please refer to the SHORTCUTS menu item in the next section.
Shortcuts are accessed from Normal mode by a push of the OK [R], UP [N] or DOWN [O] buttons on the front face. Additional
OK [R] push skips to the next Shortcut. The last Shortcut is always dedicated to entering the Menu mode (SETUP). On this last
Shortcut, an OK [R] push will return to Normal Mode and an UP [N] push will enter the Menu mode. The individual parameter
for a given Shortcut is modified using UP [N] or DOWN [O] buttons. If there is no user action for about 30 s the unit will revert
to Normal mode.
Following table shows the actions of the pushbuttons in Shortcuts mode.
Front face push buttons
STANDBY [S] Short Push
STANDBY [S] Long Push
UP [N]
OK [R]
DOWN [O]
CANCEL [Q]
28
Unit State
Any state
Any state
Shortcuts (except last)
Last Shortcut (SETUP)
Shortcut (except last)
Last Shortcut (SETUP) or
after current Shortcut has
been modified
Shortcuts (except last)
Last Shortcut (SETUP)
Shortcuts
Pushbuttons actions in Shortcuts mode
A1.5 User Manual
Unit Action
Mute/Unmute
Go to STANDBY
Modify parameter up (when available)
Enter Menu mode
Skip to next Shortcut
Exit Shortcuts mode (Normal mode)
Modify parameter down (when available)
No action
Exit Shortcuts mode (Normal mode)
Rev 1.0