Menu Mode - CH A1.5 User Manual

(1) Shortcut title. It indicates that Detailed Setup (Menu mode) can be entered at this stage
(2) Current value of the parameter. Default action is to exit (go back to Normal mode)
(3) Arrow indicating UP button [N]
(4) Next parameter value. If UP button [N] is pushed, the unit enters into Menu mode

4.2.3 Menu mode

The Menu mode allows for Configuration and Setup of the A1.5 power amplifier through a set of menus. Menu mode is entered
from the last Shortcut item (see above). From Normal mode, enter the Shortcut mode by pushing the OK [R] button. By successive
OK [R] button pushes, step to the last Shortcut item (DETAILED SETUP) and push the TOP [N] button once to enter the Menu
mode. If no shortcut is configured, simply press the OK [R] button once to enter the Menu mode.
Navigation in Menu mode is based on UP [N] and DOWN [O] buttons to select an item or to change a value. The OK [R] button
is used for validation and CANCEL [Q] to exit without saving.
Front face push buttons
STANDBY [S] Short Push
STANDBY [S] Long Push
UP [N]
OK [R]
DOWN [O]
CANCEL [Q]
Following illustration shows the elements of a the A1.5 SETUP Menu page, the entry point to the A1.5 menu structure.
30
SETUP Shortcut display elements
Unit Action
Mute/Unmute the unit
Put the unit into Standby
Move to next menu item upward
Enter next menu level or Validate choice (save setting)
Move to next menu item downward
Return to previous menu level without saving
Pushbuttons actions in Menu mode
A1.5 User Manual Rev 1.0