Connections - CH A1.5 User Manual

(1) Adjustment shafts. Insert adjustment spikes and use screwdriver to secure and adjust individual feet spikes
(2) Feet
(3) Adjustment spike heads (when inserted into adjustment shafts)
(4) Adjustment spike
Never stack any component other than CH's on your A1.5. Never use the aluminum shaft covers (top covers) when another CH
component is to be stacked on top of your A1.5.

3.3 Connections

This section provides information about how to connect the A1.5 power amplifier to your system. As the A1.5 is a modular design
with different optional boards, the description applies to the example configuration presented below. For details about how to
integrate your A1.5(s) in a specific setup, please refer to the Amplifier modes section of this user manual. If you feel unsure with
the connections to be applied to your specific configuration, please contact your authorized dealer for assistance.
The example configuration is a stereo-ready (2 input boards) power amplifier. Your amplifier could only contain a single input
board if your ordered a pair of amplifiers.
16
Adjustment shafts, feet and spikes
Shaft covers (left: stacking cover, right: top cover)
A1.5 User Manual Rev 1.0