Cleaning And Maintenance - E-line VEL90F User And Installer Instruction Manual


 The temperature display will now blink. Press +/- buttons to select the correct
temperature.
 Press > to move to the next step. Note: A sound will be heard to indicate you have
completed the preset time mode.
 Repeat the steps above to preset each day of the week.
Note: If Timer Mode has been programmed incorrectly, e.g. the END time is earlier than
the START time,
Note: When Timer Mode is on, the
Note: When the battery power is low the battery log will blink on the screen. You should
insert a new battery. The original settings can remained programmed for up to 30
minutes after the battery is taken out of the remote control handset.
Ensure that the appliance is completely cooled down and disconnected from the mains
supply before undertaking any cleaning or maintenance work.
Do not use abrasive cleaners.
Use a lightly damp cloth to wipe clean the glass panels and metal surfaces.
Keep the air inlets clear and free from dust and debris. Regular cleaning is advised to
prevent performance problems. Clean the areas around the air inlets (indicated with
arrows below) with a soft cloth/duster or vacuum cleaner.
USER INSTRUCTIONS - OPERATION
will show on the screen.
CLEANING & MAINTENANCE
icon will show on the top of the screen.