E-line VEL90F User And Installer Instruction Manual page 11

Step 2
Next, locate and remove the four
screws securing the rail at the
bottom of the front glass panel.
Remove the rail.
Step 3
Remove the front glass panel
gently gripping at both sides
and carefully pulling forwards
from the bottom edge. Once
removed, place the glass in a
secure location where it cannot
be damaged. Continue to
remove both pieces of side glass
by gently pulling towards you.
Place these in a secure location
where they cannot be damaged.
Step 4
Remove the packaged accessories from inside the fire. You should find the following
components:
1 x set of 3 ceramic logs
1 x log retaining bar
1 x appliance hanging rail
1 x power lead
1 x long fireplace fixing bracket
Before proceeding it is advised that you test the appliance for operation before continuing
with installation.
INSTALLATION
1 x bag of vermiculite gravel
2 x sets of steel side glass finishing edges
4 x short fireplace fixing brackets
1 x remote control handset
1 x bag of screws