Support; Forum; Updating Firmware - Kauai Labs VMX-pi User Manual

Support

Support
Please visit
In addition, some common needs are addressed:
Instructions for
The VMX-pi Discussion
A "factory test" procedure
properly
Requirements
VMX-pi Circuit Board (rev. 5.35 or higher)
PC with USB 2.0 port running Windows 7 or greater.
Micro-USB Cable
Updating the Firmware
Download the VMX-pi Tools for Windows
Unpack the contents of the vmx-pi.zip file and run the setup.exe program, which will
install the tools as well as all necessary device drivers for communicating over USB with
the VMX-pi, as well as some additional tools. In addition, the setup program will install
the latest firmware at the following location:
<HomeDirectory>\vmx-pi\firmware
For example, if your user name is Robot, the directory name will be C:\Users\Robot\navx-
micro\firmware.
Within that directory, the firmware file will be named using this pattern:
Support
Support
VMX Support if you are experiencing difficulty or trouble.
updating the VMX-pi Firmware

Forum

which can verify the VMX-pi circuit board is functioning

Updating Firmware

Forum
latest build.
42