Table of Contents
Advertisement
Getting started
Installing and charging the battery pack
Before using your camcorder, you first need to install and charge the battery pack. To
charge the battery pack, use the supplied AC power adaptor.
This camcorder operates only with the "InfoLITHIUM" battery pack.
"InfoLITHIUM" is a trademark of Sony Corporation.
Installing the battery pack
(1) Lift up the viewfinder.
(2) Insert the battery pack in the direction of the $ mark on the battery pack. Slide the
battery pack down until it is locked.
Attach the battery pack to the camcorder securely.
1
Note on installing the NP-F730/F730H/F750/F930/F950 battery pack
Use the camcorder while stretching out the viewfinder.
Note on the battery pack
Do not carry the camcorder by grasping the battery pack.
2
7
Advertisement
Table of Contents
