Table of Contents
Advertisement
Identifying the parts
%∞
%§
%¶
%•
%ª
%∞ LANC l control jack
l stands for Local Application Control Bus
System. The l control jack is used for
controlling the tape transport of video
equipment and peripherals connected to it.
This jack has the same function as the jack
indicated as CONTROL L or REMOTE.
%§ DV IN/OUT jack (p. 83)
This "i.LINK" mark is a trademark of Sony
Corporation and indicates that this product is
in agreement with IEEE 1394-1995
specifications and their revisions.
The DV IN/OUT jack is i.LINK compatible.
%¶ Tripod receptacle (p. 20)
Make sure that the length of the tripod screw
is less than 9/32 inch (6.5 mm). Otherwise,
you cannot attach the tripod securely and the
screw may damage the camcorder.
Floppy disk adapter
1
1 Memory slot connector (p. 93)
2 Floppy disk eject button (p. 94)
138
%•Stand
%ª MEMORY RELEASE lever
^º 2 (headphones) jack (p. 22)
^¡ AUDIO/VIDEO jack (p. 70, 82)
^™ S VIDEO jack (p. 34, 70, 82)
^£ Camera recording lamp
^¢ MIC jack (PLUG IN POWER) (p. 88)
Connect an external microphone (not
supplied). This jack also accepts a "plug-in-
power" microphone.
3 Floppy disk slot (p. 94)
4 Access lamp (p. 93)
^º
^¡
^™
^£
^¢
2
3
4
Advertisement
Table of Contents
