Table of Contents
Advertisement
Viewing a still picture – memory photo
playback
You can play back still images recorded on a floppy disk or PC card. You can also play back
6 images at a time by selecting the index screen.
Before operation
Connect the floppy disk adapter (with a disk inside) or insert a PC card into the unit.
(1) Set the POWER switch to MEMORY. Make sure that the lock knob is set to the right
(unlock) position.
(2) While pressing OPEN, open the LCD panel.
(3) Press MEMORY PLAY. The last recorded image is displayed.
(4) Press MEMORY +/– to select the desired still image. To see the previous image,
press MEMORY –. To see the next image, press MEMORY +.
2
3
PLAY
To stop memory photo playback
Press MEMORY PLAY again. Otherwise, the image through the lens will not appear on the
screen.
To play back recorded images on a TV screen
• Connect this camcorder to the TV with the supplied A/V connecting cable before
operation. You cannot play back images using the LASER LINK function.
• When operating memory photo playback on a TV or the LCD screen, the image quality
may appear to have deteriorated. This is not a malfunction. The image data is as good as
ever.
• Turn the audio volume of the TV down before operation, or there may be noise (howling)
coming from the TV speakers.
Image data modified with personal computers or shot with other equipment
You may not be able to play them back with this camcorder.
1
1
4
105
Advertisement
Table of Contents
